Getting Started

Button Instruction:

Turn On/Off ------- Press and Hold Button A (for 3 seconds)
Tap Button A ----- Toggles Vibration Speeds
Tap Button B ----- Toggles Air Pump Settings


Air Pump Details:

Level 1 : Subtle Contractions
Level 2 : Mild Contractions
Level 3 : Deep Contractions (tightest)

Charging

Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 2 hours to fully charge. Once it is fully charged, the solid red light will turn off.

Note:

It is a magnetic charger and will only work if positioned correctly. When attempting to charge, if a solid red light doesn't turn on, rotate the cable 180 degrees.

Cleaning & Care

· Clean your device before and after each use.
· Clean with warm water. Do NOT use soap on the inner sleeve, as it may degrade the material.
· Dry thoroughly before storing.
· Keep away from extreme heat or cold.
· Make sure your toy is recharged at least once every six months.


Usage Tip

Air Vent

If the toy is too tight, locate the air vent which is on the opposite sides of the buttons.
During use, try rythmically covering and uncovering the vent- it may improve the sensation.


Lubricant

Before insertion, generously apply lube to the inside of the sleeve, the entry hole and your penis. Water based lube may dry out quickly, so you may need to reapply.
We recommend using JO Anal H20 Lubricant for the best experience.

App Download

Compatible with:

·iPhone/iPad Air/iPad Mini/iPod Touch iOS 9.0 and later
·Android 4.3 and later (with Bluetooth 4.0 enabled)
·Mac (with Bluetooth 4.0 enabled)
·Windows PC (need a Lovense USB Bluetooth Adapter to connect )


Lovense Remote Go to Download Page

Pairing with Your Devices

Pair with iOS/Android/Mac

1. Turn on Max. A blinking green light means it's ready to connect.
2. Open and log into the Lovense Remote app.
3. Click the  icon.
4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your device. 

Pair with PC

1. Turn on Max. A blinking green light means it's ready to connect.
2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.
3. Open and log into the Lovense Remote app.
4. Click the  icon.
5. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC. 

If you are using Max and have the old generation dongle , use the following guides to pair with your PC:

Connect and Play

1. Go to the "Long Distance" tab in Lovense Remote app.
2. Tap "+" to add a contact. Enter their email and tap "Add."
3. After your partner accepts the request, they will show up in this tab.
4. When messaging, press the "+" button to connect with your partner. Long distance sex is avaiable via the "Sync Together" or "Video Chat" button.
5. Click the two arrow icon (at the bottom) to change how the toys sync together.
6. Click the "Long Distance Sex" or "Remote Control" button to switch between those modes.

Troubleshooting



正在载入...
Are you sure?

 

登录
     忘记密码?
  登录